System specific event IDs
Event ID
0xEA22
0xEA23
0xEA24
0xEA30
0xEA40
0xEA41
0xEA50
0xEA51
0xEA53
0xEA54
0xEA61
0xEA62
0xEA63
0xEA64
240
Description
ZInfo2 : Interface X is faulty configured.
Error - RS485 interface X2 - Value exceeds the limits
ZInfo2 : Project engineering for X2
Error - RS485 interface X3 - Value exceeds the limits
ZInfo2 : Project engineering for X3
Error - Configuration RS485 interface X2/X3: Interface/protocol missing, default settings are used.
ZInfo2 : Project engineering for X2
ZInfo3 : Project engineering for X3
Internal error - Please contact the hotline!
Internal error - Please contact the hotline!
Internal error - Please contact the hotline!
PROFINET IO controller: Error in the configuration
ZInfo1 : Rack/slot of the controller
ZInfo2 : Device no.
ZInfo3 : Slot at the device
OB : Not relevant to the user
PK : Not relevant to the user
DatID : Not relevant to the user
PROFINET IO CONTROLLER: There is no PROFINET IO controller at the configured slot
ZInfo1 : Rack/slot of the controller
ZInfo2 : Recognized ID at the configured slot
PK : Not relevant to the user
DatID : Not relevant to the user
PROFINET IO CONTROLLER: PROFINET configuration: There are too many PROFINET IO devices configured
ZInfo1 : Number of configured devices
ZInfo2 : Slot
ZInfo3 : Maximum possible number of devices
PROFINET IO controller: IO controller reports multiple parametrization of a periphery address
ZInfo1 : Periphery address
ZInfo2 : Slot
ZInfo3 : Data width
PK : Not relevant to the user
DatID : Not relevant to the user
Internal error - Please contact the hotline!
Internal error - Please contact the hotline!
Internal error - Please contact the hotline!
PROFINET IO controller/EtherCAT-CP: Error in the configuration
ZInfo1 : Too many devices
ZInfo1 : Too many devices per second
ZInfo1 : Too many input bytes per ms
ZInfo1 : Too many output bytes per ms
VIPA System SLIO
HB300 | CPU | 013-CCF0R00 | en | 16-40