Counter - Additional Functions - YASKAWA CPU 013C Manual

Deployment I/O periphery
Counting > Counter - Additional functions

5.6.7 Counter - Additional functions

5.6.7.1 Overview
Schematic structure
5.6.7.2 Gate function
Function
Gate function abort and
interrupt
122
The illustration shows how the additional functions influence the counting behavior. The
following pages describe these additional functions in detail:
Starting, stopping and interrupting a count function of counter 0 to counter 2 exclu-
n
sively happens via the SW gate by setting the SW gate of
COUNT - Counter controlling' on page 105.
n Starting, stopping and interrupting a count function of counter 3 happens via the
internal gate (I gate). The i gate is the result of logic operation of HW gate and SW
gate. The HW gate evaluation of the connection 'Gate 3' may be deactivated by the
parametrization. With a de-activated HW gate evaluation the triggering exclusively
happens by setting the SW gate of
trolling' on page 105.
The parametrization defines if the gate interrupts or aborts the counter process.
n At abort function the counter starts counting with the load value after gate restart.
Ä Chapter 5.6.4 'SFB 47 -
Ä Chapter 5.6.4 'SFB 47 - COUNT - Counter con-
HB300 | CPU | 013-CCF0R00 | en | 16-40
VIPA System SLIO