Frequency Measurement - YASKAWA CPU 013C Manual

Configuration with VIPA SPEED7 Studio
Deployment I/O periphery > Frequency measurement
Frequency
Max. counting frequency
Hardware interrupt
Hardware gate opening
Hardware gate closing
On reaching comparator
Overflow
Underflow

9.6.6 Frequency measurement

9.6.6.1 Overview
210
Description
Specify the max. frequency for track A/pulse, track B/direc-
tion, Latch and HW gate
Range of values: 1, 2, 5, 10, 30, 60, 100kHz
Description
Hardware interrupt by edge 0-1 exclusively at HW gate
channel 3
n enabled: Process interrupt by edge 0-1 exclusively at
HW gate channel 3 with open SW gate
n disabled: no hardware interrupt
Hardware interrupt by edge 1-0 exclusively at HW gate
channel 3
n enabled: Process interrupt by edge 1-0 exclusively at
HW gate channel 3 with open SW gate
n disabled: no hardware interrupt
Hardware interrupt on reaching comparator
n enabled: Hardware interrupt when comparator is trig-
gered, can be configured via 'Characteristics of the
output'
n disabled: no hardware interrupt
Hardware interrupt overflow
n enabled: Hardware interrupt on overflow the upper
counter limit
n disabled: no hardware interrupt
Hardware interrupt on underrun
n enabled: Hardware interrupt on underflow the lower
counter limit
n disabled: no hardware interrupt
n 4 channels
n Sub module 'Counter'
Ä Chapter 5.7 'Frequency measurement' on page 128
n
VIPA System SLIO
Assignment
60kHz
Assignment
disabled
disabled
disabled
disabled
disabled
HB300 | CPU | 013-CCF0R00 | en | 16-40