Parametrization; Status Indication - YASKAWA CPU 013C Manual

Deployment I/O periphery
Digital output > Status indication

5.5.3 Parametrization

5.5.3.1 Address assignment
Sub module Output address
DI24/DO16 136
137

5.5.4 Status indication

Digital output
DO +0.0 ... DO +0.7
DO +1.0 ... DO +1.3
Power supply
1L+
2L+
3L+
5L+
Error
1F
2F
on: ● | off: ○
100
Access
BYTE
BYTE
LED Description
green
● Digital output Q+0.0 ... 0.7 has "1" signal
○ Digital output Q+0.0 ... 0.7 has "0" signal
● Digital output Q+1.0 ... 1.3 has "1" signal
○ Digital output Q+1.0 ... 1.3 has "0" signal
LED Description
green
● DC 24V electronic section supply
○ DC 24V electronic section supply not available
● DC 24V power section supply outputs OK
○ DC 24V power section supply outputs OK
● DC 24V power section supply SLIO bus OK
○ DC 24V power section supply SLIO bus not available
● DC 24V power section supply inputs OK
○ DC 24V power section supply inputs not available
LED Description
red
● Error power supply sensor
○ no error
● Error at overload respectively short circuit at the outputs
○ no error
Assignment
Digital output Q+0.0 ... Q+0.7 (X5)
Digital output Q+1.0 ... Q+1.3 (X5)
HB300 | CPU | 013-CCF0R00 | en | 16-40
VIPA System SLIO