Part 2: Installing The Intramail Voice Mail Daughter Board (Vmdb); Installing The Intramail Vmdb - NEC IntraMail UX5000 Manual
Hide thumbs
Also See for IntraMail UX5000:
- Manual (588 pages) ,
- Hardware manual (370 pages) ,
- Resource manual (220 pages)
Table of Contents
Advertisement
Installation
Part 2: Installing the IntraMail Voice Mail Daughter Board (VMDB)
Installing the IntraMail VMDB
To install the IntraMail Voice Mail Daughter Board (VMDB):
1.
Install the plastic stand-offs (Figure 4: Installing the IntraMail VMDB).
2.
Position the IntraMail VMDB over the XXX connector on the CCPU.
3.
Push the VMDB into the XXX connector and be sure the standoffs snap into place.
4.
Insert the IntraMail CompactFlash through the slot in the CCPU blade front panel.
The IntraMail CompactFlash Card is not hot-swappable. Do not insert or remove the
CompactFlash Card with power applied.
4 ◆ IntraMail Installation
Included with the IntraMail VMDB are four plastic stand-offs (spacers).
1a.
You must install one stand-off in each corner of the IntraMail VMDB.
1b.
Be sure to install the stand-offs from the back (underneath) side of the blade. Once installed, the
1c.
IntraMail VMDB card must face up.
Push the corners of the IntraMail VMDB down so the spacers lock into the CPU
3a.
Figure 4: Installing the IntraMail VMDB
Caution
UX IntraMail Manual
Advertisement
Table of Contents
