Auto Time Stamp - NEC IntraMail UX5000 Manual

Auto Time Stamp

Description
Automatically hear the time and date a message was left.
After a Subscriber Mailbox user listens to a message, IntraMail can optionally announce the time and date
the message was left. The Subscriber can enable Auto Time Stamp from their mailbox, or you can optionally
enable it from programming. Auto Time Stamp helps if the subscriber needs to know the time and date of
each message they receive without taking any extra steps. With Auto Time Stamp turned on, IntraMail auto-
matically announces the date, time, and (optionally) the caller's number at the end of each message. With
Auto Time Stamp turned off, the subscriber must dial TI while listening to a message to get the same infor-
mation.
Conditions
● None
Default Setting
● Disabled
Programming
1. Enable Auto Time Stamp from your Subscriber Mailbox.
1. See Operation below.
2. Should the mailbox be set for Auto Time Stamp?
1. If yes:
47-02-11: A
2. If no:
47-02-11: A
Other Related Features
Features
None
IntraMail Features
M O
AILBOX PTIONS
Auto Time Stamp is available on the Mailbox Options Menu.
T D
IME AND ATE WITH
IntraMail uses the UX5000 Time and Date.
T D
IME AND ATE
An extension can listen to a message and dial a code to hear the time the message was sent.
UX IntraMail Manual
T S ( 254)
UTO IME TAMP PAGE
- Enter 1 to enable Auto Time Stamp.
✔ By default, Auto Time Stamp is disabled.
T S ( 254)
UTO IME TAMP PAGE
- Enter 0 to disable Auto Time Stamp.
✔ By default, Auto Time Stamp is disabled.
M ( 147)
ENU PAGE
V M ( 224)
OICE AIL PAGE
S ( 225)
TAMP PAGE
Auto Time Stamp
IntraMail Features ◆ 55