Log Onto Voice Mail; Local (On-Site) Logon; Remote Log On - NEC IntraMail UX5000 Manual

Log Onto Voice Mail

Description
An extension user can press a key to log onto (access) their IntraMail mailbox.
A subscriber can log onto their mailbox using a method that best suits their needs and location. While at
their own extension, the subscriber just presses a single key to log onto their mailbox. To use their mailbox
while at a co-worker's extension, the subscriber dials the IntraMail master number, followed by their mail-
box number (which is normally the same as their extension number). If they are away from the office, the
subscriber can still use their mailbox by calling in through the Automated Attendant.

Local (On-site) Logon

An extension user can log onto their mailbox in the following ways:
● Press their voice mail key to log onto their Subscriber Mailbox.
● If you have new messages, press your VMsg soft key.
Dial the IntraMail master number (e.g., 700), followed by their mailbox number. This method is typi-
●
cally used by Guest Mailbox users, as well as subscribers attempting to log into their Subscriber Mailbox
from a co-worker's extension.

Remote Log On

A Subscriber Mailbox user can call into the Automated Attendant and log onto their mailbox. Following are
two of the ways a user can do this:
After the Automated Attendant answers, dial a digit (typically #) followed by their mailbox number. This
●
method allows outside callers to log into their mailboxes from outside the company. Once they log into
their mailbox, they can use the allowed features in the mailbox main menu. To avoid unauthorized
access to their mailbox, the user should enable their own unique Security Code.
If an extension has a Direct Inward Line that voice mail picks up, the caller can dial # during their greet-
●
ing to log into their mailbox (instead of leaving a message). This method allows subscribers to dial their
own number and then use the features of their mailbox. This capability must be set up in the user's Next
Call Routing Mailbox. For example:
- Program the Next Call Routing Mailbox # digit as LOGON to IXXX.
- While listening to their greeting, the subscriber can dial:
# (to route to their Next Call Routing Mailbox), then
# and their mailbox number to log onto their mailbox.
By default, this option is provided in Call Routing Mailbox 1. Additionally, the subscriber should enable
a Security Code for their mailbox to prevent unauthorized logons.
Conditions
● None
Default Setting
Local Log On enabled.
●
Remote Log On enabled for Call Routing Mailbox 1.
●
UX IntraMail Manual
Log Onto Voice Mail
IntraMail Features ◆ 137