NEC IntraMail UX5000 Manual page 80

Call Routing Mailbox
Conditions
● None
Default Setting
● See Description above.
Programming
1. Set up the Call Routing Mailbox.
1.
47-07-01: (
2.
47-07-02: R
2. To record an Instruction Menu message for the Call Routing Mailbox:
1. See Operation below.
3. To assign which Dial Action Table will provide dialing options for this Call routing Mailbox:
47-08-01: D
4. To change the amount of time Automated Attendant callers have to dial options:
1. See
A
2.
47-08-03: T
- By default, Automated Attendant callers have 5 seconds to dial commands.
3. If the caller waits too long to dial:
5. To set the Maximum Length of Instruction Menus:
47-01-03: S
70 ◆ IntraMail Features
273)
PAGE
Enter 1 to enable the selected Routing Mailbox.
✔ By default, all Routing Mailboxes are enabled (1).
M T (
OUTING AILBOX YPE PAGE
Enter 1 to assign the mailbox as a Call Routing Mailbox.
- By default, Routing Mailboxes 1-8 are Call Routing Mailboxes and 9-16 are Announcement
Mailboxes.
✔ The default Instruction Menu is, "If you are calling from a touch tone phone . . ."
A T (
IAL CTION ABLE PAGE
Enter the Dial Action Table ( 1-16 ) that will provide the dialing options for the Call Routing
Mailbox.
✔ By default, all Call Routing Mailboxes use Dial Action Table 1.
A (
UTOMATED TTENDANT PAGE
L D C
IME IMIT FOR IALING
Enter the timeout duration ( 0 - 99 seconds).
When the associated Dial Action Table has a Timeout action programmed, the caller routes to
3a.
that destination.
When the associated Dial Action Table does not have a Timeout action programmed, the
3b.
Instruction Menu repeats 3 times and then IntraMail hangs up.
M L
UBSCRIBER ESSAGE ENGTH
Adjust the Outgoing Message Length ( 1 - 4095 seconds) as required.
✔ By default, this interval is 120 seconds.
273)
276)
for more.
57)
( 276)
OMMANDS PAGE
( 245)
PAGE
UX IntraMail Manual