Rec2 Action - Quick Message Without Greeting (4); Logon Action - Log Onto Voice Mail (5) - NEC IntraMail UX5000 Manual

Program 47: IntraMail
- For example, to allow callers to leave a Quick Message extensions 301-399, for key 3 enter REC1
Additional Information
● See

REC2 Action - Quick Message Without Greeting (4)

(REC2)
Use this action to allow an Automated Attendant caller to leave a Quick Message at an extension. With this
action, the caller will not hear the extension's greeting prior to leaving the message. Instead, the caller hears
the voice prompt "Recording" followed by a beep.
Number Option
To have the caller leave a quick Message at a specific extension, the corresponding Number option
●
should be the extension number.
To have the caller leave a Quick Message at any caller-dialed extension, the corresponding Number
●
option should be IXXX.
To have the caller leave a Quick Message at a caller-dialed extension in a specific range, the corre-
●
sponding Number option should be XXX.
- For example, to allow callers to leave a Quick Message extensions 301-399, for key 3 enter REC2
Additional Information
See
●

LOGON Action - Log Onto Voice Mail (5)

(LOGON)
Use this key action to allow an Automated Attendant caller to log onto Voice Mail. Depending on program-
ming (see Number Option below), the caller is logged directly into a Subscriber Mailbox or is prompted to
enter a Subscriber Mailbox of their own choosing. You cannot use the LOGON option with Call Routing
and Announcement Mailboxes.
Number Option
● To log directly into a specific Subscriber Mailbox, enter the mailbox number in the corresponding
Number option.
- For example, to have key 4 log directly into Subscriber Mailbox 305, for key 4 enter LOGON for
● To have IntraMail request Automated Attendant callers to select a Subscriber Mailbox to log into, enter
N in the corresponding Number option. The key you choose must represent the first digit in the Sub-
scriber Mailbox numbers.
- For example, to have the Automated Attendant request callers to enter the number of the Subscriber
● To have IntraMail require Automated Attendant callers to enter a Subscriber Mailbox to log into (with-
out playing an announcement), enter XXX in the corresponding Number option. The key you choose
must represent the first digit in the Subscriber Mailbox numbers.
- For example, to allow callers to log onto mailboxes 301-399, for key 3 enter LOGON for the Action
● To log into any valid Subscriber Mailbox, enter IXXX in the corresponding Number option.
- For example, to allow callers to dial 1 plus any Subscriber Mailbox number to log on, for key 1
Additional Information
● See
298 ◆ IntraMail Programming
for the Action and XXX for the corresponding Number.
Q M ( 202)
UICK ESSAGE PAGE
for the Action and XXX for the corresponding Number.
Q M ( 202)
UICK ESSAGE PAGE
the Action and 305 for the corresponding Number.
Mailbox into which they wish to log, for key 3 enter LOGON for the Action and N for the corre-
sponding Number. When callers dial 3, they hear, "Please enter your mailbox number."
and XXX for the corresponding Number.
enter LOGON for the Action and IXXX for the corresponding Number.
L O V M (
OG NTO OICE AIL PAGE
for more.
for more.
for more.
137)
UX IntraMail Manual