NEC IntraMail UX5000 Manual page 68

Automated Attendant
Conditions
None
●
Default Setting
● See Description above.
Programming
1. Assign Answer Tables to trunks.
1.
47-10-01: A
2. Set up the Automated Attendant to answer trunk calls.
1.
22-02-01: I
2.
22-07-01: DIL A
3. Set up the Answer Tables.
1. See
A
4. Set up the Call Routing Mailboxes.
1. See
C
5. Set up the Dial Action Tables.
1. See
D
Other Related Features
Features
None
IntraMail Features
A T
NSWER
Determines how the Automated Attendant answers outside calls on each line.
C R
ALL OUTING
The mailbox associated with an Answer Table that specifies the dialing options (Dial Action Table)
and Instruction Menu that announcements are available to Automated Attendant callers.
D A
IAL CTION
Defines the dialing options for the Call Routing Mailbox chosen by the active Answer Table.
F D
AX ETECTION
The Automated Attendant can route outside calls to the company fax machine.
58 ◆ IntraMail Features
T A
NSWER ABLE SSIGNMENT
Assign an Answer Table (1-8) to each trunk that the Automated Attendant should answer.
✔ By default, all trunks are assigned to Answer Table 1.
C T S
NCOMING ALL RUNK ETUP
Assign Service Type 4 to each trunk you want to be a DIL.
- Make a separate entry for each Night Service mode.
✔ By default, all trunks are Service Type 0 (Normal).
SSIGNMENT
For each trunk you designated as type 4 above, enter the first (lowest) voice mail extension number
as the DIL destination.
- Make a separate entry for each Night Service mode.
✔ By default, there are no DIL destinations programmed.
for more.
T ( 41)
NSWER ABLES PAGE
R M (
ALL OUTING AILBOX PAGE
for more.
A T ( 81)
IAL CTION ABLE PAGE
( 41)
ABLES PAGE
M ( 69)
AILBOX PAGE
T ( 81)
ABLE PAGE
( 105)
PAGE
( 281)
PAGE
for more.
69)
UX IntraMail Manual