NEC IntraMail UX5000 Manual page 244

Unscreened Transfer
2. Optionally set the UX65000 Transfer Recall interval.
24-02-04: T
Other Related Features
Features
None
IntraMail Features
A T
NSWER
Determines how the Automated Attendant answers outside calls on each line.
A
UTOMATED
The Answer Table determines how the Automated Attendant answers calls.
C R
ALL OUTING
The mailbox associated with an Answer Table that specifies which dialing options (Dial Action Table)
and announcements are available to Automated Attendant callers.
C ID
ALLER
IntraMail provides Caller ID data for an Unscreened Transfer as the call is ringing.
D A
IAL CTION
Defines the dialing options for the Call Routing Mailbox chosen by the active Answer Table.
●
● You cannot program a Call Routing Mailbox as an Unscreened Transfer (UTRF) Dial Action Table
destination.
F U
ORCED
The Subscriber Mailbox can optionally convert Automated Attendant Screened Transfers to
Unscreened Transfers.
M , B
ODEM
M , B
ODEM
The Automated Attendant can route calls to the built-in modem via an Unscreened Transfer.
N C
EXT ALL
The Next Call Routing settings for a Subscriber Mailbox may provide additional options after the
caller leaves a message.
S
CREENED
After an Automated Attendant caller dials an extension, IntraMail calls (screens) the destination
extension to see if the transfer can go through.
Operation
N/A
234 ◆ IntraMail Features
R T
RANSFER ECALL IME
Set the Transfer Recall interval ( 0 - 9999 seconds) as required.
- Unanswered Unscreened Transfers route to the extension's mailbox after this interval.
✔ By default, the Transfer Recall Timer is 30 seconds.
( 41)
ABLES PAGE
A ( 57)
TTENDANT PAGE
M ( 69)
AILBOX PAGE
V M ( 74)
AND OICE AIL PAGE
T ( 81)
ABLE PAGE
T ( 111)
NSCREENED RANSFER PAGE
-I ( 278)
UILT N PAGE
-I ( 180)
UILT N PAGE
R M ( 188)
OUTING AILBOX PAGE
T ( 209)
RANSFER PAGE
UX IntraMail Manual