Powering Up The Ux5000 And Checking The Ccpu Leds - NEC IntraMail UX5000 Manual

Installation

Powering Up The UX5000 and Checking the CCPU LEDs

To power up the UX5000:
1. Turn the power switch to On ( 1 ).
2. Wait about three minutes for the UX5000 to boot. After the UX5000 boots:
3. Go to Part 4: IntraMail Programming on the next page..
Power
Switch Power
LED
6 ◆ IntraMail Installation
The blue LED adjacent to the power switch goes on.
1a.
LED1 (the Run LED) will be flashing slowly.
2a.
( LED1 flashes green 1/2 second on and 1/2 second off.)
You'll see the time, date, extension number, and soft keys in the keyset displays.
2b.
Run
Off
LED
Off
Off
Figure 6: Checking the CCPU LEDs
UX IntraMail Manual