47-08: Call Routing Mailbox Options; 47-08-01: Dial Action Table; 47-08-02: Screened Transfer Timeout; 47-08-03: Time Limit For Dialing Commands - NEC IntraMail UX5000 Manual

Program 47: IntraMail

47-08: Call Routing Mailbox Options

47-08: Call Routing Mailbox Options
Use
P
ROGRAM
Mailboxes in
See
●

47-08-01: Dial Action Table

(Dial Action Table)
Use this option to assign the Dial Action Table to the Call Routing Mailbox. The Dial Action Table defines
the dialing options for the call Routing Mailbox.
● See
Options
● 1 - 16 (Dial Action Table 1-16)
Default
✔ 1 (Dial Action Table 1)

47-08-02: Screened Transfer Timeout

(Scrn Trf Timeout
Use this option to set how long a Screened Transfer (TRF) from the Automated Attendant will ring an unan-
swered extension before recalling.
Options
● 0 - 255 seconds
- Entering 0 causes immediate recall.
Default
✔ 15 seconds

47-08-03: Time Limit for Dialing Commands

(Dialing Timeout)
This option determines how long IntraMail will wait for an Automated Attendant caller to dial before rout-
ing the call to the Timeout destination.
Be sure your Dial Action Tables have a Timeout action programmed.
●
See
●
If the caller waits too long to dial:
When the associated Dial Action Table has a Timeout action programmed, the caller routes to that
●
destination.
When the associated Dial Action Table does not have a Timeout action programmed, the Instruction
●
Menu repeats 3 times and then IntraMail hangs up.
Options
0 - 99 seconds
●
- Entering 0 causes the Automated Attendant to immediately route callers to the Timeout destination
Default
✔ 5 seconds
276 ◆ IntraMail Programming
47-08: C R M
ALL OUTING AILBOX
47-07-02: R M
OUTING AILBOX
C R M (
ALL OUTING AILBOX PAGE
C R M (
ALL OUTING AILBOX PAGE
C R M (
ALL OUTING AILBOX PAGE
programmed in the active Dial Action Table.
to set the options for mailboxes assigned as Call Routing
O
PTIONS
.
T
YPE
for more.
69)
and
69) D A T (
IAL CTION ABLE
and
69) D A T (
IAL CTION ABLE
for more.
81)
PAGE
for more.
81)
PAGE
UX IntraMail Manual