2-Digit Extension Numbering Example - NEC IntraMail UX5000 Manual

2-Digit Extension Numbering Example

When setting up 2-digit extension numbering, do not use extensions 10-32. Although you can set up this
application in
assigned in
reserved for Routing Mailboxes and cannot be reassigned.
The following example assigns a 2-digit extension number (46) to station port 6 and enables the Subscriber
Mailbox for extension 46. It also changes the * and # digits in the active Dial Action Table to allow Quick
Message and Remote Logon to the new 2-digit extension.
1. Enable 2-digit extension numbers 40-49.
1.
11-01-01: S
1a.
1b.
2. Change the extension number for port 6 to 46.
11-02-01: E
For extension port 6, enter 46 .
3. Change the mailbox number to match the new extension number.
47-02-02: M
For mailbox 6, assign mailbox number 46 .
4. Modify the Dial Action Tables to accommodate the new numbering.
47-13: I
NTRA
1c.
1d.
1e.
UX IntraMail Manual
IntraMail Does Not Support 2-Digit Extension Numbers 10-42
11-01-01: S N
YSTEM UMBERING
47-02-02: M N (
AILBOX UMBER PAGE
N
YSTEM UMBERING
In for the digit 4x, enter 2 .
11-01-01: D
IGIT
In for the digit 4x, enter 2 .
11-01-01: T
YPE
✔ By default, the digit 4 is set up as a 3-digit extension number (200-299).
N
XTENSION UMBERING
✔ By default, extension port 6 is assigned to extension 306.
N ( 252)
AILBOX UMBER PAGE
✔ By default, mailbox 6 is assigned to mailbox number 306.
M D A T (
AIL IAL CTION ABLES PAGE
Make key 4 (digit 4) Action = UTRF (2) and Data = XX .
Make key 11 (*) Action = REC1 (3) and Data = IXX .
Make key 12 (#) Action = LOGON (5) and Data = IXX .
✔ By default:
Key 2 is undefined.
Key 11 is REC1 to IXXX.
Key 12 is LOGON to IXXX.
Flexible Mailbox Numbering Plan
and
11-02-01: E N
XTENSION UMBERING
will not function. This is because mailboxes 1-32 are
252)
295)
, Subscriber Mailboxes
IntraMail Features ◆ 109