NEC IntraMail UX5000 Manual page 221

Hide thumbs Also See for IntraMail UX5000:
Table of Contents

Advertisement

Programming
1.
Assign the STRF action to a key on the active Dial Action Table.
47-13-01: D
Enter 1 to assign an available key for Screened Transfer (STRF).
1a.
1b.
Set how long a Screened Transfer will ring an unanswered extension before recalling to the
2.
Automated Attendant.
47-08-02: S
Set how long a Screened Transfer (STRF) from the Automated Attendant will ring ( 0 - 255 seconds)
an unanswered extension before recalling.
Other Related Features
Features
None
IntraMail Features
A
T
NSWER
ABLES
Determines how the Automated Attendant answers outside calls on each line.
A
UTOMATED
The Answer Table determines how the Automated Attendant answers calls.
C
R
ALL
OUTING
The mailbox associated with an Answer Table that specifies which dialing options (Dial Action Table)
and announcements are available to Automated Attendant callers.
You cannot program a Call Routing Mailbox as a Screened Transfer (STRF) Dial Action Table destination.
C
ID
ALLER
AND
IntraMail provides Caller ID data for a Screened Transfer call after it is answered.
D
A
IAL
CTION
Defines the dialing options for the Call Routing Mailbox chosen by the active Answer Table.
F
U
ORCED
NSCREENED
The Subscriber Mailbox can optionally convert Automated Attendant Screened Transfers to
Unscreened Transfers.
U
NSCREENED
After an Automated Attendant caller dials an extension, IntraMail immediately transfers the call to the
destination and hangs up.
Operation
N/A
UX IntraMail Manual
A
T
A
(
IAL
CTION
ABLE
CTIONS
PAGE
Normally, the corresponding Routing option should be XXX. Note that the key you choose for
this action is the first digit of the called extension number.
- For example, to allow callers to place Screened Transfers to extensions 300-399, for key 3
enter STRF for the Action and XXX for the corresponding Routing.
To have Screened Transfer call a specific extension, the corresponding Routing option should
be that extension's number. The caller then dials that single digit to reach the extension.
- For example, to have callers dial 8 to reach extension 303, for key 8 enter STRF for the
Action and 303 for the corresponding Routing.
✔ By default, there are no STRF actions programmed.
T
T
(
CREENED
RANSFER
IMEOUT
✔ By default, this interval is 15 seconds.
(
41)
PAGE
A
(
57)
TTENDANT
PAGE
M
(
69)
AILBOX
PAGE
V
M
(
74)
OICE
AIL
PAGE
T
(
81)
ABLE
PAGE
T
(
111)
RANSFER
PAGE
T
(
232)
RANSFER
PAGE
297)
276)
PAGE
Screened Transfer
IntraMail Features ◆ 211

Advertisement

Table of Contents
loading

Table of Contents