Using A Group Mailbox As A Directory Dialing Mailbox - NEC IntraMail UX5000 Manual

Directory Dialing
Should Directory Dialing Mailbox callers be able to dial 0 for other options or # to go to another
2.
routing mailbox?
1. If yes:
2. If no:
3. To have an outside call be directly answered by the Directory Dialing Mailbox:
1. Make sure the active Answer Table uses the Call Routing Mailbox programmed as a Directory Dialing
Mailbox.
- See
- This is not assigned by default.
4. To allow callers to access Directory Dialing from a Dial Action Table action:
1. Make sure you have an action in the active Dial Action Table that is a GOTO to the Directory Dialing
Mailbox.
- See
- This is not assigned by default.

Using a Group Mailbox as a Directory Dialing Mailbox

1. Set up the Group Mailbox as a Directory Dialing Mailbox.
1.
47-03-02: G
2.
47-03-03: G
3.
47-03-03: R
4. Refer to
88 ◆ IntraMail Features
47-15-08: N C R
EXT ALL OUTING
- Assign a Next Call Routing Mailbox (801-832) to the Directory Dialing Mailbox.
- Once assigned, dialing # routes to the Next Call Routing Mailbox and plays its message.
Dialing 0 follows the 0 action of the Next Call Routing Mailbox.
✔ By default, there is no Next Call Routing Mailbox assigned.
47-15-08: N C R
EXT ALL OUTING
- Remove the assignment by pressing CLEAR .
✔ By default, there is no Next Call Routing Mailbox assigned.
A T ( 41)
NSWER ABLES PAGE
D A T (
IAL CTION ABLE PAGE
M N
ROUP AILBOX UMBER
Select an available mailbox number for the Group Mailbox
M T (
ROUP AILBOX YPE PAGE
Enter 2 to assign the Group Mailbox as a Routing Mailbox.
M N
OUTING AILBOX UMBER
Specify the number of the Routing Mailbox ( 1 - 32 ) to use as for the Group Mailbox.
✔ By default, Group Mailboxes are assigned as Subscriber Mailboxes (1).
and set up the Routing Mailbox for Directory Dialing.
B S ( 85)
ASIC ETUP PAGE
✔ The default is Routing Mailbox 1.
M ( 307)
AILBOX PAGE
M ( 307)
AILBOX PAGE
for more.
for more.
81)
( 260)
PAGE
260)
( 260)
PAGE
UX IntraMail Manual