47-01 Program Entry - NEC IntraMail UX5000 Manual

47-01 Program Entry

CALL1 + #*#* + Password (12345678) + HOLD + 4701 + Option.
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
Press this:
Editing
HOLD
-1 +1
← →
CONF
CLEAR
Line Keys (LK)
Navigation
back
select
UX IntraMail Manual
47-01: IntraMail System Options Program Entry
(Entry Range) [Default Setting]
IntraMail Master Name (See Keys for Entering Names on page 244) [IntraMail ##]
Subs Msg Length (1-4095) [120]
Mbox Msg Length (1-4095) [120]
Msg Bkup/Adv Time (1-60) [5]
Fax Extension (Extension number or no entry (entered by pressing CLEAR)) [No entry]
Pager CBack (Digits, M=Number of messages, X=Extension number) [X*M#]
LK1=M, LK2=X
Pager Dial Delay (0-99) [9]
Notify Pager Intvl (1-255) [15]
Notify N-Pgr intvl (1-255) [20]
Notify Busy Intvl (1-255) [15]
Notify RNA Intvl (1-255) [30]
Notify RNA Rings (1-99) [5]
Notify Call Attmpt (1-99) [5]
Retry Until Ack (1=Yes - enabled, 0=No - disabled) [0]
Name Format (0=First-Last, 1=Last-First) [0]
Intra Mail Port (Any valid and licensed port, 0=Not assigned) [0]
Play PAD Control (1-63 in .5dBm steps. 1=-15.5dBm, 63=+15.5dBm) [32 (0dBm)]
Record PAD Control (1-63 in .5dBm steps. 1=-15.5dBm, 63=+15.5dBm) [32 (0dBm)]
Enter (accept) data you entered and advance to the next prompt, or advance to the next
prompt without changing your entry.
Scroll backwards ( ) or forwards (
-1
When editing an entry, moves the cursor left or right.
When editing an entry, delete the character to the left of the cursor.
When editing an entry,
CLEAR
Where indicated, press a line key to enter a specific value for the selected option.
Backs up to the previous level (e.g., from Option to Series, or from Series to Program).
Scroll consecutively backwards or forwards through selected Option or Series.
Selects currently displayed Option or Series
Program 47: IntraMail
To do this:
) through the list of available entries.
+1
erases the entire entry from the display.
IntraMail Programming ◆ 251