Make Call - NEC IntraMail UX5000 Manual

Make Call

Description
A Subscriber Mailbox user can dial MC to return a call without knowing their caller's number.
Make Call lets a Subscriber Mailbox user listen to a voice message and dial MC to return the call without
knowing their caller's number. Make Call automates returning messages since you don't have to dial the
message sender's number. Make Call is always available for messages received from co-workers. Make call
is available for messages received from outside callers if the UX5000 has Caller ID enabled (and provided
by the connected telco).
While listening to a message, the first line of the display shows the caller's number (or extension).
Conditions
● None
Default Setting
● Available if Caller ID is enabled and provided by the telco and Caller ID is set up in UX5000 program-
ing.
Programming
1. No IntraMail specific programming required.
1. No additional programming is required to enable Caller ID in IntraMail.
2. Check your telco service.
1. Be sure the telco provides Caller ID to the UX5000.
Check your programming to be sure it is set up to receive Caller ID and pass it to the IntraMail
3.
voice mail ports.
1.
14-01-22: B
Enter 1 (Yes) to enable this option.
2.
14-02-10: A
Enable ( 1 ) a trunk's ability to receive Caller ID data.
3.
20-09-02: C
Enter 1 (Yes) to enable the Caller ID display at an extension.
4.
20-06-01: C
Assign Class of Service to extensions.
4. Set up Trunk Group Routing.
1.
14-05-01: T
Assign trunks to trunk groups ( 1 - 100 ).
UX IntraMail Manual
T D S - C
ASIC RUNK ATA ETUP ALLER
✔ By default, this option is disabled.
T D S - C
NALOG RUNK ATA ETUP ALLER
✔ By default, a trunk's ability to receive Caller ID data is disabled (0).
S O (I
LASS OF ERVICE PTIONS NCOMING
- This option does not apply to IntraMail Voice Mail Ports (extensions 343-350).
✔ By default, this option is disabled.
S E
LASS OF ERVICE FOR XTENSIONS
✔ By default, extension 301 has Class of Service 15. All other extensions have Class of Service 1.
G
RUNK ROUPS
- Make Call callouts will use Trunk Group Routing (dial 9) when selecting outbound routes.
✔ By default, all trunks are in group 1.
ID V M
TO OICE AIL
ID
C S ) - C ID D
ALL ERVICE ALLER ISPLAY
Make Call
IntraMail Features ◆ 153