System Alarm Report - NEC Univerge SV8100 Programming Manual

Issue 1.0
Level:
IN
Description
Use Program 90-11 : System Alarm Report to define the details of the system alarm
report.
Input Data
2 - 714
Program 90 : Maintenance Program
Item
No.
02 Report Method
When alarm reports are to be e-mailed, set this
option to 1. E-mail address set in 90-11-08.
04 --- Not Used ---
06
SMTP Host Name
When alarm reports are to be e-mailed, set the
SMTP name (ex: smtp.yourisp.com). Contact your
ISP (internet service provider) for the correct entry
if needed.
07 SMTP Host Port Number
When alarm reports are to be e-mailed, set the
SMTP host port number. Contact your ISP
(internet service provider) for the correct entry if
needed.
08 To E-mail Address
When alarm reports are to be e-mailed, set this
e-mail address to which the report should be sent.
09 Reply Address
When alarm reports are to be e-mailed, set the
e-mail address where replies should be e-mailed.
10 From Address
When alarm reports are to be e-mailed, set this
e-mail address for the station sending the report.
11 DNS Primary Address
When alarm reports are to be e-mailed, set the
DNS primary address.

90-11 : System Alarm Report

Item
Program 90 : Maintenance Program
UNIVERGE SV8100
Input Data
0 = No Report
1 = E-mail Address
Up to 255 Characters
0~65535
Up to 255 Characters
Up to 255 Characters
Up to 255 Characters
0.0.0.0~255.255.255.255
Default
0
No
Setting
25
No
Setting
No
Setting
No
Setting
0.0.0.0