Hardware Specifications; Hardware Specifications For Brocade Mlx Routers; Power Specifications - Brocade Communications Systems MLX Series Installation Manual

Hardware Specifications

This chapter describes hardware specifications for Brocade MLX and NetIron XMR routers.

Hardware specifications for Brocade MLX routers

The following sections describe hardware specifications for Brocade MLX routers.

Power specifications

The following power supply frequency requirements apply to Brocade MLX 4-slot, 8-slot, and 16-slot routers:
•
AC Input Rating: 100 to 240V, 50/60 Hz, 16.0 A maximum per power supply
•
AC Operating Voltage Range: 90 - 264V, 50/60 Hz
•
Inrush current: 40A peak maximum at 25 degrees C (77 degrees F)
•
DC Input Rating: -48V, 30.0 A maximum per power supply
•
DC Operating Range: -40 to -60V
•
Inrush current: 45A peak maximum at 25 degrees C (77 degrees F)
The following power supply frequency requirements apply to the Brocade MLX-32 routers:
•
AC Input Rating: 200 -240V, 50/60 Hz, 16.0 A maximum per power supply
•
AC Operating Voltage Range: 180 to 264V
•
Inrush current: 30A peak maximum at 25 degrees C (77 degrees F)
•
DC Input Rating: -48V
•
75A maximum per power supply (2400W PSU)
•
80A maximum per power supply (3000W PSU)
•
DC Operating Range: -40 to -60V
•
<70A peak for any initial current surge or spike of 10mS or less at either cold or warm start
Table lists power consumption information for Brocade MLX routers with all base components installed, and with only the specified
interface modules installed.
Brocade MLX router power consumption values
Model @100 VAC
Amps
MLX routers with 8x10G interface modules only
MLX-4 14
MLX-8 28
MLX-16 56
MLX-32 N/A
Brocade MLX Series and Brocade NetIron XMR Installation Guide
53-1004195-02
@200 VAC
Watts BTU/hr Amps
1389 4740 7
2760 9419 14
5591 19081 28
N/A N/A 57
@-48VDC
Watts BTU/hr Amp
s
1389 4740 29
2760 9419 57
5591 19081 116
11391 38876 237
Watts BTU/hr
1389 4740
2760 9419
5591 19081
11391 38876
277