Replacing The Drum Bearings; Replacing The Drum Shaft Bearings - Honeywell FlexLine SmartServo 954 Service Manual

MAINTENANCE

Replacing the drum bearings

Figure 9-8
266
1. Open the drum cover.
2. Take out the drum shaft bushing.
3. Replace the bearings, refer to figure below
4. Install the bushing.
5. Install drum and displacer.
6. Close the cover.

Replacing the drum shaft bearings

Do not grease the carbon PTFE bearings. The drum bearings do not require any
lubricant at all.
Service Manual
954 SmartServo FlexLine
Part No.: 4417340 Revision 1