SERVICE TOOLS
Menu Item
[menu]
[commissioning]
[commands]
[extra information]
[display contrast]
[identification]
[display settings]
[HART address]
[display test]
[Communication statistics]
Table 5-1
5.1.5.1.3
Figure 5-4
Part No.: 4417340 Revision 1
Allows you to switch ON/OFF buttons time-out:
•
Main screen: If the button is not pressed within 15 minutes,
HART SmartView switches to PV screen
•
Standby mode: If the button is not pressed within
15 minutes, HART SmartView switches to standby mode
Allows you to switch between address 7 and 8
Performs blank/black test.
Display communication errors and activity
The menu items
Display Contrast Screen
[display contrast]
The
screen (see
bar. By moving the scroll bar, you can adjust the contrast. Moving to the
right immediately increases the contrast, moving to the left decreases
the contrast.
The display contrast screen
Service Manual
954 SmartServo FlexLine
Description
Screen title.
Configuration
Allows you to send a
The [extra information]
Allows you to adjust
Displays information
Figure
5-4) displays a horizontal scroll
35