Honeywell FlexLine SmartServo 954 Service Manual page 73

COMMISSIONING
Part No.: 4417340 Revision 1
The TII-SRV firmware supports the following configurable
compensations:
•
Wire weight compensation
•
Mechanical hysteresis elimination
• Magnet temperature compensation
•
Tank shell temperature compensation for high tanks
•
Compensation for wire expansion over temperature
•
Wire elongation compensation for free wire
•
Wire elongation compensation for wire on drum
•
Density compensation for level measurement
•
Hydrostatic deformation compensation
•
Unbalance compensation
•
Roof Immersion Compensation
•
Drum temperature compensation
•
Displacer volume compensation for pressure for density
measurement
•
Displacer volume compensation for temperature for density
measurement
•
Tilt compensation for density measurement
For correct functioning of the TII-SRV module in the instrument, the
following entities can be set by using either Engauge or some by
SmartView, summed up per Engauge tab.
Service Manual
954 SmartServo FlexLine
65