Honeywell FlexLine SmartServo 954 Service Manual page 85

COMMISSIONING
Name
[Lock test stop level]
[Lock to level]
[Lock test to level]
[Test]
[Water interface dip]
[CIU water interface
dip]
Part No.: 4417340 Revision 1
Value Range Default Value
Service Manual
954 SmartServo FlexLine
Explanation
<0.0> Determines the level to which
the displacer goes after a
Lock to level, Lock test to
level or Test command.
This command sends the
displacer to the [Lock test
stop level] and remains
there.
This command sends the
displacer to the [Lock test
stop level] and when
reached, issues an Unlock
command and the displacer
returns to the selected
interface.
This command sends the
displacer to the [Lock test
stop level] and when
reached, issues a Block
command and after some
time issues an Unlock
command and the displacer
returns to the selected
interface.
This command searches for
the water level and after that
returns to the default
operation mode.
This command searches for
the water level and stays
there.
77