Jumpers - Honeywell FlexLine SmartServo 954 Service Manual

SYSTEM ARCHITECTURE
Jumper
Number
a) For an explanation of the entities concept, see section 0
Part No.: 4417340 Revision 1
The commissioning parameters and the diagnostics data are stored
when the power is switched off.

Jumpers:


With the jumpers, specific hardware settings can be made:
Function
1 All warning and monitoring-related commissioning entities
protected and cannot be changed
2 The password is protected from being read
3 All commissioning entities are protected and cannot be changed
4 Board-specific jumper
5 Board-specific jumper
Service Manual
954 SmartServo FlexLine
a
are
19