SAFETY AND SECURITY
2.6
Personal Safety
WARNING! National, local and company regulations regarding personal
WARNING! Take appropriate precautions when chemical or toxic product
2.7
Warnings and Cautions
General
2.7.1.1
Opening of the Instrument
WARNING! DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE MAY BE
WARNING! Make sure that the power to the device is switched off before
WARNING! Treat the flange surface of the cover and the housing with care.
2.7.1.2
Tools
WARNING! Use non-sparking tools and explosion-proof testers. Use
Part No.: 4417340 Revision 1
safety must be followed.
Pay attention to the kind of product in the tank. If
there is any danger for your health, wear a gas mask and take all
the necessary precautions.
vapours are present (compressed air, chemical protection suit, and
detection equipment).
PRESENT
When it is required to open the instrument in an explosive
hazardous environment, take care of the following:
you open the covers of the device. Failure to do so may cause
danger to persons or damage the equipment. All covers of the
device must be closed before switching the power on again.
Keep the flange surface free of dirt. The O-ring must be present
and undamaged.
suitable explosion-proof tools (for example, testing devices)!
Service Manual
954 SmartServo FlexLine
5