Integrated Display (Tii-Lcd); Gauge Scan After Novram Reset - Honeywell FlexLine SmartServo 954 Service Manual

COMMISSIONING

7.3.10.9.7 Gauge scan after Novram reset

Integrated display (TII-LCD)

7.3.11.1 Introduction
188
1. Do Novram reset of HCI-TRL card.
2. Scan the gauge. The error message appears giving
information about gauge scan fail.
3. Click on FCM-TRL card in smartlink and set GPU and
Flexconn address of particular gauge as "0".
5. Scan the gauge again.
The integrated display board (TII-LCD) is a module that communicates
to the TII-SRV to read Level process value, and to the FCI-HRT/TII-RTD
to read temperature process value. The values are displayed on the
integrated LCD display.
Service Manual
954 SmartServo FlexLine
Part No.: 4417340 Revision 1