SAFETY AND SECURITY
2.3
Safety Instructions
Safety Instructions
EC Declaration of Conformity (for EU)
Control Drawings for FM & CSA
Users
Additional Information
Environmental Conditions
Part No.: 4417340 Revision 1
See the safety instructions shipped with the device for installation,
commissioning, operation, and maintenance.
Refer to the EC declaration of conformity shipped with the device.
Refer to the control drawings shipped with the device.
The mechanical and electrical installation must be carried out only by
trained personnel with knowledge of the requirements for installation of
explosion-proof equipment in hazardous areas.
The entire installation procedure must be carried out in accordance with
national, local, and company regulations.
The entire electrical installation shall be carried out in accordance with
the national requirements for electrical equipment to be installed in
hazardous areas.
If you require additional information, contact Honeywell or its
representative.
Observe the environmental conditions for the temperature and the
pressure.
Service Manual
954 SmartServo FlexLine
3