Scsi Id Assignment Guidelines; Figure A-7 Configure: Library Settings Screen - Sun Microsystems Enterprise Tape Library 7/3500 Field Service Manual

2. Press the Configure button.
The Configure: Library Settings screen is displayed (
System
Offline
Standby
Load Port
S
Stop
FIGURE A-7
3. Press the Select button to highlight the desired option.
4. Press the Left and Right Arrow buttons to scroll to the desired setting.
5. Press the Execute button to change to the new setting.
6. To return to the Operator screen, press the Back button twice.

SCSI ID Assignment Guidelines

When selecting SCSI IDs using this procedure, remember that each SCSI device on the same
SCSI bus must have a unique ID number (from 0 to 15). SCSI devices include the library
robotics, the host computer, the library tape drives, internal and external hard disk drives, and
so on.
If you set up the library with multiple SCSI busses, you can assign the same number to two
or more devices provided each device is on a different SCSI bus.
170 Sun Enterprise Tape Library 7/3500 Field Service Manual • July 1997
Back Forward
Overview Tapes
Configure: Library Settings
_
M o d e l :
# Bins:
#Drives:
Device:
SCSI ID:
Configure: Library Settings Screen
FIGURE A-7
Home
Operator Operator Service
Select
Execute
).