Parameter Lists; Parameter Options; Default Settings - Danfoss VLT FC 102 Programming Manual

Parameter Lists

5 Parameter Lists

5.1 Parameter Options

5.1.1 Default Settings

Changes during operation
TRUE means that the parameter can be changed while the frequency converter is in operation. FALSE means that the
frequency converter must be stopped before a change can be made.
4-set-up
All set-ups: The parameter can be set individually in each of the 4 set-ups, that is 1 single parameter can have 4 different
data values.
1 set-up: Data value is the same in all set-ups.
N/A
No default value available.
Conversion index
This number refers to a conversion figure used when writing or reading via a frequency converter.
Conv. 100 75 74 70
index
Conv. 1 3600000 3600 60
factor
Table 5.1 Conversion Index
Data type Description
2 Integer 8
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Visible String
33 Normalized value 2 bytes
35 Bit sequence of 16 boolean variables
54 Time difference w/o date
Table 5.2 Conversion Index Description
M0010001
Programming Guide
67 6 5 4
1/60 1000000 100000 10000 1000 100
Danfoss A/S © 10/2019 All rights reserved.
3 2 1 0 -1 -2
10 1 0.1 0.01 0.001 0.0001 0.00001 0.000001
-3 -4 -5 -6
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
TimD
291
5 5