Danfoss VLT FC 102 Programming Manual page 129

Parameter Descriptions
13-01 Start Event
Option: Function:
[17] Mains out of See parameter group 5-3* Digital
range Outputs for further description.
[18] Reversing See parameter group 5-3* Digital
Outputs for further description.
[19] Warning See parameter group 5-3* Digital
Outputs for further description.
[20] Alarm (trip) See parameter group 5-3* Digital
Outputs for further description.
[21] Alarm (trip See parameter group 5-3* Digital
lock) Outputs for further description.
[22] Comparator 0 Use the result of comparator 0 in
the logic rule.
[23] Comparator 1 Use the result of comparator 1 in
the logic rule.
[24] Comparator 2 Use the result of comparator 2 in
the logic rule.
[25] Comparator 3 Use the result of comparator 3 in
the logic rule.
[26] Logic rule 0 Use the result of logic rule 0 in the
logic rule.
[27] Logic rule 1 Use the result of logic rule 1 in the
logic rule.
[28] Logic rule 2 Use the result of logic rule 2 in the
logic rule.
[29] Logic rule 3 Use the result of logic rule 3 in the
logic rule.
[33] Digital input Use the value of DI18 in the logic
DI18 rule (High = true).
[34] Digital input Use the value of DI19 in the logic
DI19 rule (High = true).
[35] Digital input Use the value of DI27 in the logic
DI27 rule (High = true).
[36] Digital input Use the value of DI29 in the logic
DI29 rule (High = true).
[37] Digital input Use the value of DI32 in the logic
DI32 rule (High = true).
[38] Digital input Use the value of DI33 in the logic
DI33 rule (High = true).
[39] Start This event is true if the frequency
command converter is started (either via
digital input, fieldbus, or other).
[40] Drive stopped This event is true if the frequency
converter is stopped or coasted
(either via digital input, fieldbus, or
other).
M0010001
Programming Guide
13-01 Start Event
Option:
[41]
[42]
[43]
[44]
[45]
[46]
[47]
[48]
[50]
[51]
[60]
[61]
[76]
[77]
[78]
[90]
[91]
[92]
[93]
[94]
[95]
[96]
[97]
[98]
[99]
[100]
[101]
Danfoss A/S © 10/2019 All rights reserved.
Function:
Reset Trip This event is true if the frequency
converter is tripped (but not trip-
locked) and [Reset] is pressed.
Auto Reset This event is true if the frequency
Trip converter is tripped (but not trip-
locked) and an automatic reset is
issued.
OK Key This event is true if [OK] is pressed.
Reset Key This event is true if [Reset] is
pressed.
Left Key This event is true if [◄] is pressed.
Right Key
This event is true if [►] is pressed.
Up Key
This event is true if [
Down Key
This event is true if [
Comparator 4 Use the result of comparator 4 in
the logic rule.
Comparator 5 Use the result of comparator 5 in
the logic rule.
Logic rule 4 Use the result of logic rule 4 in the
logic rule.
Logic rule 5 Use the result of logic rule 5 in the
logic rule.
Digital Input
x30 2
Digital Input
x30 3
Digital Input
x30 4
ECB Drive
Mode
ECB Bypass
Mode
ECB Test Mode
RS Flipflop 6
RS Flipflop 0
RS Flipflop 1
RS Flipflop 2
RS Flipflop 3
RS Flipflop 4
RS Flipflop 5
Fire Mode See parameter 13-15 RS-FF Operand
S and parameter 13-16 RS-FF
Operand R.
RS Flipflop 7
3 3
▲
] is pressed.
▼
] is pressed.
127