Danfoss VLT FC 102 Programming Manual page 163

Parameter Descriptions
15-31 Alarm Log: Value
Array [10]
Range: Function:
0 [-32767 - View an extra description of the
*
32767 ] error. This parameter is mostly used
with alarm 38, internal fault.
15-32 Alarm Log: Time
Array [10]
Range: Function:
0 s [0 - View the time when the logged
*
2147483647 s] event occurred. Time is measured in
s from frequency converter start-up.
15-33 Alarm Log: Date and Time
Array [10]
Range: Function:
Size [ 0 - 0 ] Array parameter; Date & Time 0–9:
related This parameter shows when the
*
logged event occurred.
3.15.5 15-4* Drive Identification
Parameters containing read-only information about the
hardware and software configuration of the frequency
converter.
15-40 FC Type
Range: Function:
0 [0 - 6 ] View the FC type. The readout is
*
identical to the frequency converter
series power field of the type code
definition, characters 1–6.
15-41 Power Section
Range: Function:
0 [0 - 20 ] View the FC type. The readout is
*
identical to the frequency converter
series power field of the type code
definition, characters 7–10.
15-42 Voltage
Range: Function:
0 [0 - 20 ] View the FC type. The readout is
*
identical to the frequency converter
series power field of the type code
definition, characters 11–12.
15-43 Software Version
Range: Function:
0 [0 - 5 ] View the combined SW version (or
*
package version) consisting of
power SW and control SW.
M0010001
Programming Guide
15-44 Ordered Typecode String
Range:
0
*
15-45 Actual Typecode String
Range:
0
*
15-46 Frequency Converter Ordering No
Range:
0
*
15-47 Power Card Ordering No
Range:
0
*
15-48 LCP Id No
Range:
0
*
15-49 SW ID Control Card
Range:
0
*
15-50 SW ID Power Card
Range:
0
*
15-51 Frequency Converter Serial Number
Range:
0
*
15-53 Power Card Serial Number
Range:
0
*
15-58 Smart Setup Filename
Range:
Size
related
*
Danfoss A/S © 10/2019 All rights reserved.
Function:
[0 - 40 ] View the type code string used for
reordering the frequency converter
in its original configuration.
Function:
[0 - 40 ] View the actual type code string.
Function:
[0 - 8 ] View the 8-digit order number used
for reorder the frequency converter
in its original configuration. To
restore the order number after the
power card exchange, see
parameter 14-29 Service Code.
Function:
[0 - 8 ] View the power card order number.
Function:
[0 - 20 ] View the LCP ID number.
Function:
[0 - 20 ] View the control card software
version number.
Function:
[0 - 20 ] View the power card software
version number.
Function:
[0 - 10 ] View the frequency converter serial
number.
Function:
[0 - 19 ] View the power card serial number.
Function:
[0 - 20 ] Shows the SmartStart filename.
3 3
161