Parameters: 22-** Application Functions - Danfoss VLT FC 102 Programming Manual

Parameter Descriptions
21-66 Ext. 3 On Reference Bandwidth
Range: Function:
value of this parameter, the on-
reference status bit is high.
3.20 Parameters: 22-** Application
Functions
This group contains parameters used for monitoring HVAC
applications.
22-00 External Interlock Delay
Range: Function:
0 s [0 - 600 s] Only relevant if 1 of the digital
*
inputs in parameter group 5-1*
Digital Inputs has been
programmed for [7] External
Interlock. The external interlock
timer introduces a delay after the
signal has been removed from the
digital input programmed for
external interlock, before reaction
takes place.
22-01 Power Filter Time
Range: Function:
0.50 s [0.02 - 10 s] Sets the time constant for the
*
filtered power readout. A higher
value gives a more steady readout
but a slower system response to
changes.
M0010001
Programming Guide
Danfoss A/S © 10/2019 All rights reserved.
3 3
197