Danfoss VLT FC 102 Programming Manual page 130

Parameter Descriptions
13-02 Stop Event
Option:
3 3
[0] False
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current Limit
[7] Out of current
range
[8] Below I low
[9] Above I high
[10] Out of speed
range
[11] Below speed
low
[12] Above speed
high
[13] Out of feedb.
range
[14] Below feedb.
low
[15] Above feedb.
high
[16] Thermal
warning
[17] Mains out of
range
[18] Reversing
[19] Warning
[20] Alarm (trip)
128
®
VLT HVAC Drive FC 102
Function:
Select the boolean (true or false)
input to deactivate smart logic
control.
Enters the fixed value of false in the
logic rule.
Enters the fixed value of true in the
logic rule.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
See parameter group 5-3* Digital
Outputs for further description.
Danfoss A/S © 10/2019 All rights reserved.
13-02 Stop Event
Option: Function:
[21] Alarm (trip See parameter group 5-3* Digital
lock) Outputs for further description.
[22] Comparator 0 Use the result of comparator 0 in
the logic rule.
[23] Comparator 1 Use the result of comparator 1 in
the logic rule.
[24] Comparator 2 Use the result of comparator 2 in
the logic rule.
[25] Comparator 3 Use the result of comparator 3 in
the logic rule.
[26] Logic rule 0 Use the result of logic rule 0 in the
logic rule.
[27] Logic rule 1 Use the result of logic rule 1 in the
logic rule.
[28] Logic rule 2 Use the result of logic rule 2 in the
logic rule.
[29] Logic rule 3 Use the result of logic rule 3 in the
logic rule.
[30] SL Time-out 0 Use the result of timer 0 in the
logic rule.
[31] SL Time-out 1 Use the result of timer 1 in the
logic rule.
[32] SL Time-out 2 Use the result of timer 2 in the
logic rule.
[33] Digital input Use the value of DI18 in the logic
DI18 rule (High = true).
[34] Digital input Use the value of DI19 in the logic
DI19 rule (High = true).
[35] Digital input Use the value of DI27 in the logic
DI27 rule (High = true).
[36] Digital input Use the value of DI29 in the logic
DI29 rule (High = true).
[37] Digital input Use the value of DI32 in the logic
DI32 rule (High = true).
[38] Digital input Use the value of DI33 in the logic
DI33 rule (High = true).
[39] Start This event is true if the frequency
command converter is started (either via
digital input, fieldbus, or other).
[40] Drive stopped This event is true if the frequency
converter is stopped or coasted
(either via digital input, fieldbus, or
other).
[41] Reset Trip This event is true if the frequency
converter is tripped (but not trip-
locked) and [Reset] is pressed.
M0010001