Table of Contents
Advertisement
3.4.2
Limiting the Autoset Vertical Search Range
Description
►
You can set the amplitude floor so that the signals lower than the setting will
be ignored by the Autoset search.
Operation
►
Press
Enter the amplitude limit and unit for the Autoset search.
Range: -60 to +20 dBm
3.4.3
Limiting the Autoset Horizontal Search Range
Description
►
You can change the frequency span limit in the display to get a better view of
the Autoset result. By default, the frequency span after Autoset is set at
3 MHz.
Operation
►
Press
Enter the span frequency for the Autoset search.
Manual Range: 100 Hz to 3 GHz
41
> Amp.Floor[F2] and switch the range from Auto to Man.
> Span[F3] and switch the range from Auto to Man.
February 2017
Advertisement
Table of Contents
