Table of Contents
Advertisement
3.10.7
Split Spectrum View
Description
►
The split spectrum view is able to view two different sweep ranges on the
display at the same time using a split screen view. The top and bottom view
can have independent sweep ranges, amplitudes, spans and other settings.
However only one split screen (top or bottom) can be swept each time.
Operation
►
Press
to activate the upper split screen.
Pressing Active Win.[F1] will toggle the sweep between the upper and
lower screen.
Press Alternate Sweep[F2] for the analyser to alternate the sweep
between the upper and lower screen at the end of each sweep.
NOTE:
Example
►
February 2017
>Window Setup[F1 ] > Split Spectrum[F2] > Active Win[F1]
No operations can be performed in alternate sweep mode.
After exiting the split spectrum view, the analyser will use
the settings from the active window. The settings for the
inactive screen will be retained for the next time that split
spectrum view is used.
Figure 67.
84
Advertisement
Table of Contents
