Creating A Limit (From Marker Data) - Promax AE-166 User Manual

Press Limit Offset[F2] and set an offset level.
Press Create Limit Line Now[F1].

A limit line will automatically be created based on the trace and offset
level.

A limit line can be created any number of times.
Press Return[F7] > Save Limit Line[F5] to save the currently selected
limit line.
4.2.3

Creating a Limit (from Marker Data)

Description
►
Marker data can be used to create limit lines. Please see the marker chapter
for details on markers. A maximum of 10 points can be created.
Operation
►
Press
line.
Limit line: 1 ~ 5
Press Mkr Data to Limit Line[F4].
The AE-166/167 is split into two screens. The top screen shows the
trace and limit lines and the bottom screen shows the limit line table.
February 2017
Figure 106.
> Edit Select Limit[F1] > Limit Line [F1] and choose a limit
136