Power Up; Power Down - Promax AE-166 User Manual

2.3.3

Power Up

Steps
►
Insert the AC power cord into the power socket.
The power button exterior will be lit blue to indicate that the
AE-166/167 is in standby mode.
Press the power button for a few seconds to turn the AE-166/167 on.
The power button will turn orange and the AE-166/167 will start to
boot up.
NOTE:
2.3.4

Power Down

Description
►
The AE-166/167 has two methods to power down: Normal and Forced
Power Down.
The normal power down method will save the system state and end any
running processes. The state is saved for the next time the instrument is
turned back on.
The forced power down method only does a minimum state save.
Normal Power Down
►
Press the power button. The system will automatically handle the power down
procedure in the following order:
The system state is saved.
Outstanding processes are closed in sequence.
The LCD backlight is turned off.
The system enters standby mode (the power key changes from orange to
blue).
NOTE:
February 2017
It takes a little less than 1 minute for the AE-166/167 to
fully startup.
The process takes ~10 seconds.
14