3.6.6
Sweep Control / Sweep Mode
Description
►
The Sweep Control function and the Sweep Mode key
Sweep Mode from Normal to Fast.
The Fast setting speeds up the signal processing and the display update rate
to increase the overall sweep time. This mode is especially useful when the
span is greater than 1 MHz.
When set to Normal, signal processing and update rate is set to normal levels.
Operation
►
Press
and Fast.
OR
Press
Display Icon
►
The Sweep icon is displayed on the right-hand side of the screen
when the sweep is in either Fast or Normal mode.
February 2017
> Sweep Control [F7] to toggle the Sweep Mode between Norm.
and toggle the Sweep Mode between Norm. and Fast.
toggles the
52