3.11.6
Using the Wake Up Clock
Description
►
The AE-166/167 has a wake-up clock to allow the spectrum analyser to
automatically turn on at a set time.
Operation
►
Press
parameters.
Select Clock[F1]: Choose a wake-up clock (1~7).
State[F2]: Turns the selected clock on/off.
Hour[F3]: Set the wake-up hour.
Minute[F4]: Set the wake-up minute.
Repeat Single[F5]: Set the wake-up clock to repeat or single.
NOTE:
3.11.7
Alarm Output
Description
►
Allows the pass/fail output to be output via the ALARM OUT port.
Operation
►
Press
87
> Date/Time[F4] > Wake-Up Clock[F3] and set the following
Only single days can be configured for the wake-up clock.
Output: Open collector
> Alarm Output[F6] and toggle the ALARM OUT port on or off.
Figure 69.
February 2017