Data Logging Power Meter Measurements - Promax AE-166 User Manual

Press More[F6] > Trigger[F1] to toggle between a free
run (internal) trigger and an external trigger.

Trigger: Free, Ext

Ext trigger input: 3.3 V CMOS
Press More[F6] > MAX/MIN HOLD[F2] to toggle the MAX/MIN hold
measurements on/off in the power meter bar.

The MIN/MAX measurements will be displayed in the power bar meter
in the center of the screen.
NOTE:
4.5.2

Data Logging Power Meter Measurements

Description
►
When in Power Meter mode, the spectrum analyser is able to log the power
meter measurements over a user-defined time period at user-defined
intervals.
Operation
►
Press
Press Type[F2] and select Power Meter[F7].
Data Source[F3] will automatically be set to Power State.
Press PMET Record Option[F4] and set the recording options:

Record Stop[F1]: Sets the recording time for automatic data logging:
00 :00 :00 (continuous) or 00 :00 :01 ~ 23 : 59: 59

Record Step[F2]: 20 msec ~ 999 sec
149
Figure 120.
The return to the normal Spectrum Mode, turn the power
meter off by pressing
Meter[F1] and toggle the power meter off.
to enter the save menu.
> Power Meter[F2] > Power
February 2017