Settings
►
Insert the 3G USB modem into the front panel USB A port and wait for
the 3G USB
Press
Config[F2] > Apply[F6] and wait for the 3G USB modem to establish the
WLAN settings.
"Finish!!", is shown when the configuration is complete.
The network settings will be displayed in the System menu icons.
Display Icon
►
The 3G USB icon turns green when a successful connection has
been made.
Hi SLIP Port
►
Press
HiSLIPPort to see the Hi Slip Port number.
HiSlip port 4880
Reset LAN
►
It may be necessary to reset the LAN configuration settings before the LAN
can be used.
Press
reset the LAN.
It may take a few moments before the LAN is reset.
February 2017
icon to appear.
> More[F7] > RmtInterface[F1] > LAN[F2] > WLAN
Figure 129.
> More[F7] > RmtInterface Config[F1] > LAN[F2] >
> More[F7] > RmtInterface Config[F1] > LAN Reset[F3] to
168