Table of Contents
Advertisement
3.10
Display
The Display key configures the basic display settings as well as setting up the
display mode (spectrum, spectrographic, topographic) and the split screen
modes.
3.10.1
Adjusting the LCD Brightness
Description
►
The LCD brightness levels can be adjusted to three pre-set levels.
Operation
►
Press
Hi: High brightness
Mid: Medium brightness
Lo: Low brightness
3.10.2
Turning the LCD Backlight Off
Description
►
The LCD backlight can be turned off to preserve power or to prolong the
lifetime of the LCD display when not in use.
Operation
►
Press
When the backlight is off, press any function key to turn the LCD
backlight back on.
3.10.3
Setting a Display Line (Reference Level Line)
Description
►
The Display Line function is used to super-impose a reference level line over
the traces.
Operation
►
Press
Set the display line level and unit.
February 2017
> LCD Brightness[F2] to toggle the display brightness:
> LCD Backlight[F3] and turn the LCD backlight off.
> Display Line[F4] to turn the display line on.
78
Advertisement
Table of Contents
