Promax AE-166 User Manual page 150

Add a Step
►
Up to 20 steps can be added to each sequence. Each panel operation is
recorded as a step.
After each panel operation is performed, press
step (in some cases this is not necessary – check if the operation appears in
the sequence editor window).
In the following example the center frequency and span are added as steps to
a sequence:
Press
Press
The two operations are added to the Sequence Editor.
Press the
NOTE:
Add Delay to Sequence
►
The delay function adds a delay between steps.
Press Delay Time[F2] > and enter the delay time.
Range: 100 ms ~ 10 s
Press

The delay time will be inserted as a step.
NOTE:
141
> Center Freq[F1] > 20 MHz >
> Zero Span[F3] >
Figure 110.
key again to return to the sequence function menu.
The arrow keys can be used to move the cursor to the
desired step when in the Sequence menu.
to add the delay time to the sequence editor.
Figure 111.
The arrow keys can be used to move the cursor to the
desired step.
the key to record the
.
.
February 2017