3.1.2
Start and Stop Frequency
Description
►
The start/stop frequency function will set the start and stop frequency of the
span.
Operation
►
To set the start frequency, press
frequency and unit.
To set the stop frequency, press
frequency and unit.
Range: 0 kHz ~ 3 GHz
Resolution: 1 Hz
Default Start frequency: 0 Hz
Default Stop frequency: 3 GHz
Display
►
NOTE:
February 2017
Figure 19.
The start and stop frequency can change when the span
settings are used.
The stop frequency must be set higher than the start
frequency (for spans 0), otherwise the span will be
automatically set to 100 Hz.
> Start Freq[F2] and enter the
> Stop Freq[F3] and enter the
22