Pause Sequence
►
The Wait to Go function is used to pause a sequence until Continue[F1] is
pressed. This is useful for observing measurements before moving onto the
next step.
Press Wait to Go[F3] >
Wait to Go will be inserted as a step.
When a sequence is running, Press Continue[F1] to resume running the
sequence.
Insert Sequence
►
Inserts another sequence into the current sequence.
Press Do Sequence[F4] > and select a sequence to insert into the current
sequence.
The selected sequence will be inserted as a step.
NOTE:
Delete Step
►
Any step in the Sequence Editor can be deleted.
Use the arrow keys on the front panel to highlight the step
you wish to delete.
February 2017
Figure 112.
Figure 113.
The current sequence cannot be inserted into itself.
Figure 114.
.
142