Faq - Promax AE-166 User Manual

7 FAQ

I connected the signal but it does not appear on screen.
Run Autoset and let the AE-166/167 find the best display scale for your
target signal. Press the Autoset key, then press Autoset[F1].
I want to see which optional items are installed.
Check the optional items in the system information window. Press the System
key  System Information[F1].
The performance does not match the specification.
Make sure the device is powered On for at least 45 minutes, within
+20°C~+30°C. This is necessary to stabilize the unit to match the specification.
February 2017
174