Operation: Setting up the main channel
►
Press
Any other measurement mode will automatically be disabled.
The display splits into two screens. The top shows the channel bandwidth.
The bottom screen shows the OCBW measurement results in real time.
Press OCBW Setup[F3] to enter the OCBW setup:
CHBW[F1]: Set the channel bandwidth.
CH SPC[F2]: Set the channel space between main channels.
OCBW%[F3]: Set the % of the OCBW to CHBW.
Move Channels Up/Down
►
Press
Channel Move Up[F5]
Channel Move Down[F6]
February 2017
> Channel Analysis[F1] > OCBW[F4] and turn OCBW on.
> Channel Analysis[F1] and select:
Next main channel.
Figure 73.
Previous main channel.
94