The filename appears on the bottom of the screen as it is created.
Press
NOTE:
To save the selected file type, press Save Now[F7].
A message "SaveFinish!!" will be displayed at the bottom of the screen
when the save is successful.
NOTE:
NOTE:
February 2017
Figure 127.
to confirm the naming of the file.
If the file name is not user-defined, a default naming scheme
will be used. See the note below for details.
If the file name is not user-defined, a file name will be
automatically created in the following format for data files:
File name: Type_data source_XX.file extension
The image file names will be automatically created in the
following format:
File name: QuickJpgX.jpg
The X parameter is incremented each time the same file type is
created.
The USB and micro SD card options will only be available when
a flash drive/SD card is inserted into the front panel ports.
*The power meter option will only be available if the power
meter option is plugged in. See the Power Meter section for
power meter details.
162