Marker - Promax AE-166 User Manual

3.9

Marker

A Marker shows the frequency and amplitude of a waveform point. The
AE-166/167 can activate up to 6 markers or marker pairs simultaneously as
well as up to 10 peak markers in the marker table.
The marker table helps editing and viewing multiple markers in a single display.
A delta marker shows the frequency and amplitude difference from a reference
marker.
The AE-166/167 can automatically move a marker to various locations
including the peak signal, center frequency, and start/stop frequency. Other
marker operations regarding signal peaks are available in the Peak Search
function.

Activating a Marker

Move Marker Manually

Move Marker to Preset Locations

Activate Delta Marker

Move Delta Marker(s)Manually

Marker Functions

Move Marker to Trace

Show Markers in Table

Peak Search

Peak Configuration

Peak Table
Activating a Marker
There are two basic marker types, normal markers and delta markers. Normal
markers are used to measure the frequency/time or amplitude of a point on the
trace. Delta markers are used to measure the difference between a reference
point and a selected point on the trace.
February 2017
64